EZ-Bridge®

How do I set a Static IP address on my EZ Bridge Antenna?


______________________________________________________________________________________________________________________________________________________________ You may set a static IP address on an antenna by going to its web interface. Go to:...

Will the EZ-Bridge work with my Linksys, D-link, router etc.?


______________________________________________________________________________________________________________________________________________________________ The EZ-Bridge® works with all home and business routers and switches.

Can the EZ-Bridge® be used with VLANs?


______________________________________________________________________________________________________________________________________________________________ The EZ-Bridge® creates a layer 2 bridge between two points. The EZ-Bridge® will pass...

How can I setup a Repeater on an EZ-Bridge LT or LT+ running WISPOS software?


______________________________________________________________________________________________________________________________________________________________ Setting up a repeater is relatively easy. It is used when you have three or more units...

How Can I Determine If My EZ-Bridge Antenna System is Working?


______________________________________________________________________________________________________________________________________________________________ There are different ways on checking if your EZ Bridge is working. After following the...

How do I use the EZ Bridge as a Wi-Fi access point?


______________________________________________________________________________________________________________________________________________________________ If you need wireless access at the main building: Start by making changes on the...

My TyconOS/Ultra Discovery Tool Does Not Run!


______________________________________________________________________________________________________________________________________________________________ The TyconOS and the Ultra Discovery Tool needs Java installed on your computer in order...

What if my EZ-Bridge LT+ is bricked? Can I recover it via TFTP?


______________________________________________________________________________________________________________________________________________________________ Loading EZ-Bridge LT+ TyconOS GEN 3 Firmware Via TFTP Please make sure the EZ-Bridge...

Best method/procedure to follow for first time installs of the EZ-Bridge?


______________________________________________________________________________________________________________________________________________________________ Startup Procedure Flow Chart: https://tsi.tyconsystems.com/doc/WhitePapers/Tycon...

What changes are required to the EZ-Bridge setup to get the system up and running?


______________________________________________________________________________________________________________________________________________________________ Please be aware that no changes are required to get the units running and create a...

My EZ-Bridge was working but now it keeps dropping connection or performance has degraded. What could be the problem?


______________________________________________________________________________________________________________________________________________________________ If your system was working but now seems to be sluggish or it is dropping connection,...

How Do I Download and Install the Discovery Tool?


______________________________________________________________________________________________________________________________________________________________ To run the discovery tool, first, you need to have Java installed on your...

Which Ethernet port on EZ-Bridge-LT+ do I plug into?


______________________________________________________________________________________________________________________________________________________________ You can plug into either port.  The ports are identical. Both ports will power the...

What changes should I make to the EZ-Bridge when changing to a Multipoint system?


______________________________________________________________________________________________________________________________________________________________ The EZ-Bridge ships from the factory configured as a Point-to-Point system. Sometimes...

Is it possible only to buy receiver end if I am already using EZ Bridge LT+ product?


______________________________________________________________________________________________________________________________________________________________ Yes, it is possible. The second receiving antenna is what we call EZ Go+ There are 2...

How do I access the EZ Bridge's Web Interface?


______________________________________________________________________________________________________________________________________________________________ You can access the EZ Bridge's web interface by going to its IP address. By default,...

How do I set up the EZ Bridge?


______________________________________________________________________________________________________________________________________________________________ https://tsi.tyconsystems.com/doc/WhitePapers/Tycon Wireless White Paper - EZ-Bridge...

Can I Use the Second Ethernet Port to Link 2 Separate Access Points Together?


______________________________________________________________________________________________________________________________________________________________ The two ethernet ports under the antenna can accept 12-24V PoE. They are used to power...

How to change the transmit channel on an EZ-Bridge Ultra?


______________________________________________________________________________________________________________________________________________________________ To Change transmitter frequency, open the Unit A Access Point Web Control...

How do I turn on ping watchdog to automatically reboot the EZ-Bridge Ultra antennas?


______________________________________________________________________________________________________________________________________________________________ Navigate to the Services Page. Enable Ping Watchdog and enter the IP address of the...

How many IP Cameras can I use with my EZ-Bridge LT2+ or LT5+ wireless link?


______________________________________________________________________________________________________________________________________________________________ The EZ-Bridge LT+ can support up to 100Mbps bandwidth. Normally people will see around...

How can I secure SSH and Telnet on the EZ-Bridge


______________________________________________________________________________________________________________________________________________________________ If you want to tighten the security of accessing the EZ-Bridge unit through a terminal...

How to adjust multiple bridges distance optimization


______________________________________________________________________________________________________________________________________________________________ Using 1 Side A and have it connected to the 2 remote units to eliminate interference...

I can't open the EZ-Bridge® unit's web page with my browser


______________________________________________________________________________________________________________________________________________________________ To open the EZ-Bridge® web page with your browser you need to type in the IP address...

Is it better to use a 2.4GHz or 5GHz EZ-Bridge?


______________________________________________________________________________________________________________________________________________________________ 5GHz Bridges absolutely need to have a clear line of site.  With 2.4GHz Bridges, a...

Can I power a second device off my EZ-Bridge-LT+?


______________________________________________________________________________________________________________________________________________________________ The RJ45 connectors on the LT+ don’t have PoE output capability, but you can use a...

Can I power your EZ-Bridge products from a standard PoE Switch?


______________________________________________________________________________________________________________________________________________________________ It depends on the model. EZBR-Dual-AC can be powered from a standard PoE Switch which...

Can the EZ-Bridge be mounted indoors?


______________________________________________________________________________________________________________________________________________________________ The EZ-Bridge is designed to be used outdoors.  The enclosure and design are...

How can I connect two separate networks across an EZ-Bridge Ultra?


______________________________________________________________________________________________________________________________________________________________ It is possible to have two separate networks connected through the EZ-Bridge Ultra You...

Do I need to be an engineer or technical person to install and operate the EZ-Bridge?


______________________________________________________________________________________________________________________________________________________________ The EZ-Bridge® is plug and play with no setup required. If you can install a wireless...

How critical is line-of-sight when using the EZ-bridge.


______________________________________________________________________________________________________________________________________________________________ With Wireless Bridges, a clear line of site is always recommended. Any obstructions ie;...

How do I reset the EZ-Bridge® to factory defaults if I can't open the unit's web page?


______________________________________________________________________________________________________________________________________________________________ Power up the EZ-Bridge® unit. Wait at least 2 minutes for the unit to boot, Press and...

How do I access the EZ-Bridge® to change settings?


______________________________________________________________________________________________________________________________________________________________ The EZ-Bridge® comes from the factory programmed to be plug and play. If the units are...

Can I have a router on both sides of the EZ-Bridge® link?


______________________________________________________________________________________________________________________________________________________________ Yes, on the internet side of the link, the EZ-Bridge® would be connected to one of the...

Are the EZ-Bridge systems shipped complete with everything I need?


______________________________________________________________________________________________________________________________________________________________ Systems are shipped with everything that is needed except the mounting pole or tower...

Will my speed slow down at extended distances?


______________________________________________________________________________________________________________________________________________________________ At the recommended max distance with a clear line-of-sight and minimal external...

What is the function of the LED's on the LT


______________________________________________________________________________________________________________________________________________________________ The meaning of the LED's on the EZ-Bridge LT+ is outlined below

Can I get some help on QOS settings using WISPOS firmware?


______________________________________________________________________________________________________________________________________________________________ For the bandwidth to be used by anyone when not used by higher priorities you should...

How can I know if my bridges are communicating?


______________________________________________________________________________________________________________________________________________________________ Caution: When plugging and unplugging Ethernet cables between the POE inserter and the...

What do I need to supply when installing the EZ-Bridge® system?


______________________________________________________________________________________________________________________________________________________________ You will need CAT5/6 Ethernet cable to go between the Power Supply/PoE Inserter and the...

What if I don't have good line-of-sight between my locations? How critical is line of sight?


______________________________________________________________________________________________________________________________________________________________ At under 1/4 mile the EZ-Bridge® is powerful enough that good line of sight isn't very...

What is the bandwidth / speed capability of the different EZ-Bridge® models?


______________________________________________________________________________________________________________________________________________________________ EZ-Bridge® Dual-AC Up to 866Mbps EZ-Bridge® LT2+ Up to 100Mbps EZ-Bridge® LT5+ Up...

What is the maximum range of the different EZ-Bridge® units


______________________________________________________________________________________________________________________________________________________________ The LT and LT+ models have a range of up to 3 miles with good line of site. The Ultra...

What is the optimum signal strength dBm for best performance?


______________________________________________________________________________________________________________________________________________________________ On the status or overview page there is a signal strength meter which displays signal...

What makes the HD model different?


______________________________________________________________________________________________________________________________________________________________ The HD model comes with Power over Ethernet inserter/power supplies with built in...